HEX TYPE
| PART NUMBER | THREAD SIZ |
|---|---|
| RT-AA181-632 | 6-32 |
| RT-AA181-832 | 8-32 |
| RT-AA181-1024 | 10-24 |
| RT-AA181-1032 | 10-32 |
| METRIC SIZES | |
| RT-AA181-470 | M4 |
| RT-AA181-580 | M5 |
WRENCH TYPE
| PART NUMBER | THREAD SIZ |
|---|---|
| RT-AA181-420 | 1/4-20 |
| RT-AA181-428 | 1/4-28 |
| RT-AA181-516 | 5/16-18 |
| RT-AA181-524 | 5/16-24 |
| RT-AAA181-616 | 3/8-16 |
| RT-AAA181-624 | 3/8-24 |
| RT-AAA181-813 | 1/2-13 |
| RT-AAA181-820 | 1/2-20 |
| METRIC SIZES | |
| RT-AA181-610 | M6 |
| RT-AA181-8125 | M8 |
| RT-AA181-1015 | M10 |
| RT-AA181-12175 | M12 |
Operating instructions for RT-AA181 Wrench type threaded insert tools
1. Thread the insert on to the threaded mandrel until the insert is tight against the tool body.
2. Place one of the wrenches around the tool body to prevent turning and hold stationary. Using an open end or socket wrench turn the hex nut in a clockwise direction while holding the tool at a right angle to the work. Turn the hex nut until fi rm resistance indicates a complete compression of the threaded insert.
3. Break the nut loose by turning the wrench holding the hex nut in a counter-clockwise direction while using the other wrench to hold the tool body stationary.
1. Thread the insert on to the cap head screw until tight against the tool body. Place threaded insert into the work hole.
2. Place hex wrench in socket of cap head screw. Using an open end wrench to hold the tool body stationary, turn the hex nut in a counter clockwise direction while holding the tool at a right angle to the work. Turn the hex nut until fi rm resistance indicates a complete compression of the threaded insert.
3. Break the nut loose by turning the hex nut wrench in a clockwise direction. Remove both wrenches from the tool. Remove tool from threaded insert by turning the cap head screw counter clockwise.
We carry a full selection of threaded inserts in stock!
Please visit www.hansonrivet.com or call 1-800-RRRIVET
Toll Free: 1-800-RRRIVET
