HANSON RIVETING HAMMERS are air powered and designed to set Solid and Tubular Rivets. With the proper Bit in the tool, the end of the bit is placed on the head for solid rivets or on the end of the shank for tubular rivets. A Bucking Bar or anvil is typically used to back up the other end of the rivet. Pressure is applied to the tool during riveting. Riveting hammers are often used to rivet large objects such a panels using one person on each side of the rivet. Select the proper air hammer and bits below
Click part numbers for pricing or to buy
| MODEL | BIT SHANK DIAMETER | STROKE | WEIGHT (LBS) |
SIZE EQUIVALENT |
BLOWS PER MIN. |
RIVET DIAMETER CAPACITIES |
||
|---|---|---|---|---|---|---|---|---|
| SOLID ALUMINUM | SOLID STEEL | TUBULAR STEEL | ||||||
| HRH-2X | .401 | 2 1/4” | 3.1 | 2X | 2,580 | 1/8” | 3/32” | 5/32” |
| HRH-3X | .401 | 2 7/8” | 3.2 | 3X | 2,160 | 3/16” | 5/32” | 1/4” |
| HRH-4X | .401 | 3 3/16” | 3.4 | 4X | 1,740 | 1/4” | 3/16” | 1/4” |
| HRH-2X-737 KIT* | .401 | 2 1/4” | 3.1 | 2X | 2,580 | 1/8” | 3/32” | 5/32” |
| HRH-2X-777 KIT* | .401 | 2 1/4” | 3.1 | 2X | 2,580 | 1/8” | 3/32” | 5/32” |
| HRH-3X-737 KIT* | .401 | 2 7/8” | 3.2 | 3X | 2,160 | 3/16” | 5/32” | 1/4” |
| HRH-3X-777 KIT* | .401 | 2 7/8” | 3.2 | 3X | 2,160 | 3/16” | 5/32” | 1/4” |
| HRH-4X-737 KIT* | .401 | 3 3/16” | 3.4 | 4X | 1,740 | 1/4” | 3/16” | 1/4” |
| HRH-4X-777 KIT* | .401 | 3 3/16” | 3.4 | 4X | 1,740 | 1/4” | 3/16” | 1/4” |
*737 KIT INCLUDES
1 ea HANSON RIVETING HAMMER
2 ea Bucking Bars
4 ea Cupped Universal Head Bits: 3/32, 1/8, 5/32 & 3/16
1 ea Flush Bit with 1″ Diameter Face
2 ea Bit Retainer Springs
1 ea Brass Air Regulator
1 ea Air Tool Oil
*777 KIT INCLUDES
1 ea HANSON RIVETING HAMMER
4 ea Bucking Bars
4 ea Cupped Universal Head Bits: 3/32, 1/8, 5/32 & 3/16
4 ea Offset Universal Head Bits: 3/32, 1/8, 5/32 & 3/16
1 ea Flush Bit With 1″ Diameter Face
1 ea Flush Bit With 1-1/4″ Diameter End With Rubber Ring
2 ea Bit Retainer Springs
1 ea Brass Air Regulator
1 ea Air Tool Oil
CUPPED BITS FOR SOLID AND TUBULAR RIVETS
| BASIC PART NUMBER | RIVET STYLE |
| CA1000- * CA1001- * CA1002- * CA1102- * |
ROUND HEAD BRAZIER HEAD UNIVERSAL HD TUBULAR – ROLL CLINCHER |
| LENGTH | 1/16” DIA. RIVET |
3/32” DIA. RIVET |
1/8” DIA. RIVET |
5/32” DIA. RIVET |
3/16” DIA. RIVET |
1/4” DIA. RIVET |
| “L” | *DASH No. | *DASH No. | *DASH No. | *DASH No. | *DASH No. | *DASH No. |
| 3.5” | -01 | -1 | -6 | -11 | -16 | -21 |
| 5.5” | -02 | -2 | -7 | -12 | -17 | -22 |
Toll Free: 1-800-RRRIVET
