1. Rivet-Nuts – Thick Wall >>

button-print-gry20

During installation the body collapses on the back side which grips the inside of the mounting surface.

  • Blind – install from one side
  • Adds threads to thin sheets
  • Thick-wall design for maximum strength
  • Easy installation with manual or power tools

Screen Shot 2016-01-21 at 3.08.08 PM

THREAD
SIZE		 BASIC
PART
NUMBER*		 GRIP
RANGE
“G”		 BODY
DIAMETER
“A”		 HEAD
DIAMETER
“B”		 HEAD
HEIGHT
“C”		 OPEN END CLOSED END WORK
HOLE
DIAMETER		 DRILL
SIZE
LENGTH
“L”		 REF.
“H”		 LENGTH
“E”		 REF.
“F”		 REF.
“J”

4-40

 4-60 .010-.060 .155 .270 .025 .345 .230 .500 .385 .230 .155/.157 5/32
4-85 .060-.085 .370 .230 .525 .385 .230
4-110 .085-.110 .400 .230 .555 .390 .230
4-135 .110-.135 .425 .230 .580 .385 .230
4-160 .135-.160 .450 .230 .605 .385 .230
4-185 .160-.185 .480 .230 .635 .385 .230

6-32

 6-75 .010-.075 .189 .325 .032 .438 .300 .625 .490 .405 .189/.193 #12
6-120 .075-.120 .500 .315 .625 .440 .355
6-160 .120-.160 .500 .270 .750 .520 .310
6-200 .160-.200 .562 .290 .750 .480 .260
6-240 .200-.240 .625 .310 .750 .435 .260
6-280 .240-.280 .687 .330 .812 .455 .265

8-32

 8-75 .010-.075 .221 .357 .032 .438 .300 .625 .490 .405 .221/.226 #2
8-120 .075-.120 .500 .315 .625 .440 .355
8-160 .120-.160 .500 .270 .750 .520 .310
8-200 .160-.200 .625 .350 .750 .475 .265
8-240 .200-.240 .625 .305 .875 .555 .310
8-280 .240-.280 .687 .340 .875 .530 .290

10-32

 10-80 .010-.080 .250 .406 .038 .531 .380 .781 .630 .380 .250/.256 E
10-130 .080-.130 .594 .390 .843 .640 .390
10-180 .130-.180 .641 .390 .891 .640 .390
10-230 .180-.230 .703 .395 .953 .645 .395
10-280 .230-.280 .750 .395 1.000 .645 .395
10-330 .280-.330 .797 .385 1.047 .630 .385

1/4-20

 25-80 .020-.080 .332 .475 .058 .625 .450 .937 .760 .440 .332/.388 Q
25-140 .080-.140 .687 .450 1.000 .760 .440
25-200 .140-.200 .750 .450 1.062 .760 .440
25-260 .200-.260 .812 .445 1.125 .755 .445
25-320 .260-.320 .875 .445 1.187 .755 .445
25-380 .320-.380 .937 .445 1.250 .755 .445

5/16-18

 31-125 .030-.125 .413 .665 .062 .750 .505 1.187 .940 .550 .413/.423 Z
31-200 .125-.200 .875 .555 1.281 .960 .555
31-275 .200-.275 .937 .540 1.343 .950 .560
31-350 .275-.350 1.032 .560 1.437 .965 .570
31-425 .350-.425 1.125 .580 1.531 .985 .575
31-500 .425-.500 1.187 .565 1.593 .975 .580

3/8-16

 37-115 .030-.115 .490 .781 .088 .844 .585 1.281 1.020 .660 .490/.500 12.5mm
37-200 .115-.200 .938 .595 1.375 1.030 .670
37-285 .200-.285 1.031 .605 1.468 1.040 .680
37-370 .285-.370 1.125 .615 1.562 1.050 .690
37-455 .370-.455 1.218 .630 1.656 1.065 .710
37-540 .455-.540 1.312 .635 1.750 1.075 .715

1/2-13

 50-150 .050-.150 .625 .906 .085 .906 .605 1.328 1.030 .605 .625/.635 5/8
50-250 .150-.250 1.031 .630 1.453 1.055 .630
50-350 .250-.350 1.141 .640 1.562 1.060 .640
50-450 .350-.450 1.250 .650 1.671 1.070 .650

 

FIRST LETTER OF PART NUMBER: LETTER BETWEEN DASH NUMBERS: PART NUMBER EXAMPLES:
“A” – Aluminum
“S” – Steel
“SS” – Stainless – Type 430
“NM” – Stainless – Type 300
“BR” – Brass		 “–” Open End Round Body
“B” Closed End
“K” Keyed
“H” Full Hexagon Body

A10-80 = Aluminum, Open End

S25B140 = Steel, Closed End
A8K200 = Aluminum, Keyed, Open End
BR6KB120 = Brass, Keyed, Closed End
Metric Threads, Countersunk Heads and various finishes are available. Special sizes can be made to order.
See page w69 for Setting Tools.