MONEL RIVET / STEEL MANDREL
Q Rivets offer greater shear and tensile strength. The mandrel is designed to effect a weather-resistant seal when installed properly and provide good vibration resistance. *NOTE: Mandrels break flush with the rivet head when in the Mid-Grip Range (except -04-01’s which break at .062)
| RIVET MATERIAL MANDREL MATERIAL |
HEAD STYLE |
PART NUMBER |
Avdel® | BODY DIAMETER (NOM.) |
WORK HOLE & DRILL SIZE |
GRIP RANGE (SEE NOTE ABOVE) “G” |
BODY LENGTH (MAX.) |
HEAD DIAMETER (NOM.) |
HEAD HEIGHT (MAX.) |
TYPICAL ULTIMATE STRENGTHS IN LBS. (SEE NOTE) |
|||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| “A” | “H” | MIN | MID* | MAX | “L” | “B” | “C” | SHEAR | TENSILE | ||||||
|
PROTRUDING HEAD |
QMSD401 QMSD402 QMSD403 QMSD404 QMSD405 QMSD406 |
MSPQ-04-01 MSPQ-04-02 MSPQ-04-03 MSPQ-04-04 MSPQ-04-05 MSPQ-04-06 |
.125 1/8 |
.129/.133 #30 |
– .063 .094 .126 .188 .251 |
– .093 .125 .187 .250 .312 |
.062 .125 .187 .250 .312 .375 |
.212 .275 .337 .400 .462 .535 |
.250 | .042 | 650 | 525 | ||
| QMSD502 QMSD504 QMSD506 |
MSPQ-05-02 MSPQ-05-04 MSPQ-05-06 |
.156 5/32 |
.160/.164 #20 |
.062 .126 .251 |
.093 .187 .312 |
.125 .250 .375 |
.300 .425 .550 |
.312 | .050 | 950 | 900 | ||||
| QMSD602 QMSD604 QMSD606 QMSD608 |
MSPQ-06-02 MSPQ-06-04 MSPQ-06-06 MSPQ-06-08 |
.187 3/16 |
.192/.196 #11 |
.062 .126 .251 .376 |
.093 .187 .312 .437 |
.125 .250 .375 .500 |
.325 .450 .575 .700 |
.375 | .060 | 1450 | 1100 | ||||
| QMSD802 QMSD804 QMSD806 QMSD808 QMSD810 QMSD812 QMSD814 QMSD816 |
MSPQ-08-02 MSPQ-08-04 MSPQ-08-06 MSPQ-08-08 MSPQ-08-10 MSPQ-08-12 MSPQ-08-14 MSPQ-08-16 |
.250 1/4 |
.257/.261 F |
.062 .126 .251 .376 .501 .626 .751 .876 |
.093 .187 .312 .437 .562 .687 .812 .937 |
.125 .250 .375 .500 .625 .750 .875 1.000 |
.375 .500 .625 .750 .900 1.030 1.160 1.290 |
.500 | .080 | 2350 | 2150 | ||||
| LARGE FLANGE | QMSL402 QMSL404 QMSL406 |
MSLQ-04-02 MSLQ-04-04 MSLQ-04-06 |
.125 1/8 |
.129/.133 #30 |
.063 .126 .251 |
.093 .187 .312 |
.125 .250 .375 |
.337 .400 .462 |
.375 | .065 | 650 | 525 | |||
| QMSL504 QMSL506 |
MSLQ-05-04 MSLQ-05-06 |
.156 5/32 |
.160/.164 #20 |
.126 .251 |
.187 .312 |
.250 .375 |
.425 .550 |
.469 | .075 | 950 | 900 | ||||
| QMSL604 QMSL606 QMSL608 |
MSLQ-06-04 MSLQ-06-06 MSLQ-06-08 |
.187 3/16 |
.192/.196 #11 |
.126 .251 .376 |
.187 .312 .437 |
.250 .375 .500 |
.325 .450 .575 |
.625 | .092 | 1450 | 1100 | ||||
| 120° COUNTERSUNK |
QMSK403 QMSK404 QMSK405 QMSK406 |
MSCQ-04-03 MSCQ-04-04 MSCQ-04-05 MSCQ-04-06 |
.125 1/8 |
.129/.133 #30 |
.094 .126 .188 .251 |
.125 .187 .250 .312 |
.187 .250 .312 .375 |
.337 .400 .462 .535 |
.226 | .032 | 650 | 525 | |||
| QMSK504 QMSK506 |
MSCQ-05-04 MSCQ-05-06 |
.156 5/32 |
.160/.164 #20 |
.126 .251 |
.187 .312 |
.250 .375 |
.425 .550 |
.281 | .040 | 950 | 900 | ||||
| QMSK604 QMSK606 QMSK608 |
MSCQ-06-04 MSCQ-06-06 MSCQ-06-08 |
.187 3/16 |
.192/.196 #11 |
.126 .251 .376 |
.187 .312 .437 |
.250 .375 .500 |
.450 .575 .700 |
.344 | .050 | 1450 | 1100 | ||||
| QMSK804 QMSK806 QMSK808 QMSK810 |
MSCQ-08-04 MSCQ-08-06 MSCQ-08-08 MSCQ-08-10 |
.250 1/4 |
.257/.261 F |
.126 .251 .376 .501 |
.187 .312 .437 .562 |
.250 .375 .500 .625 |
.500 .625 .750 .900 |
.468 | .071 | 2350 | 2150 | ||||
NOTE: Values for typical ultimate strengths are a guide only and may vary greatly depending upon the application.
Toll Free: 1-800-RRRIVET
