HANSON RIVET HOME PAGE

Jack-Nut Threaded Inserts
Site Search:
THREADED INSERTS, RIVET-NUTS, CAPTIVE FASTENERS >> Jack-Nuts®
Click here for
Printer Friendly
Version

The JACK-NUT® is an economical Threaded Insert designed for use in thin, soft, or brittle materials.
During installation the body collapses on the back side to form legs which grip the inside of the mounting surface.

  • Fastens in blind holes
  • Won't distort soft plastics
  • Not hole diameter sensitive
  • Can be installed in uneven materials
  • One-step installation with manual or pnuematic tools
    		•


    THREAD
    SIZE

    PART
    NUMBER

    POP®

    BODY
    DIAMETER

    WORK HOLE
    DIAMETER

    GRIP
    RANGE

    LENGTH
    OVER ALL

    HEAD
    DIAMETER

    HEAD
    HEIGHT

    TEST RESULTS (See Note)

    TEST
    PLATE
    HOLE DIA.

    TEST
    PLATE
    THICKNESS

    ULTIMATE
    TORQUE
    (in.-lbs.)

    ULTIMATE
    TENSILE
    (lbs.)

    “A”

    “H”

    “G”

    “L”

    “B”

    “C”

    6-32

    RJN-06-187
    RJN-06-375

    4SJN
    4LJN

    .318

    .318/.330

    .015-.187
    .188-.375

    .653
    .841

    .468

    .073

    .328

    .187
    .375

    18
    18

    433
    386

    10-24

    RJN-10-187
    RJN-10-375

    6SJN
    6LJN

    .382

    .382/.400

    .015-.187
    .188-.375

    .716
    .888

    .531

    .073

    .390

    .187
    .375

    31
    31

    640
    554

    1/4-20

    RJN-25-187
    RJN-25-375
    RJN-25-500

    8SJN
    8LJN
    8XLJN

    .438

    .438/.450

    .015-.187
    .188-.375
    .376-.500

    .731
    .919
    1.094

    .625

    .073

    .438

    .187
    .375
    .500

    41
    41
    41

    820
    806
    855

    Standard material: STEEL ZINC FINISH (BRASS is available as a special order and may be subject to a minimum order quantity)
    NOTE: Values for tightening torques and ultimate tensile strengths are a guide only and may vary greatly upon the application.



       
    JNT 1100 FRICTION WRENCH
    JNT 1100 FRICTION WRENCH


    For use when installing a limited quantity of Jack-Nuts®.
    Place the wrench between screw and head of insert,
    hold wrench and run in screw to set Jack-Nut®.
    JNT 2200 LIGHT DUTY HAND TOOL
    JNT 2200 LIGHT DUTY HAND TOOL




    An economical tool for low volume installation in any material. Thread
    Jack-Nut® on to mandrel, insert into hole, and squeeze handles to set. Tool
    comes with one mandrel. Additional mandrels available to set all sizes.
    JNT 2400 HEAVY DUTY HAND TOOL
    JNT 2400 HEAVY DUTY HAND TOOL




    This rugged tool comes with all mandrels to set 6-32, 10-24,
    and 1/4-20 Jack-Nuts®.
    JNT 7529 & JNT 7530 SPIN-SPIN AIR TOOL
    JNT 7529 & JNT 7530 SPIN-SPIN AIR TOOL

    For high volume setting of Jack-Nuts®. These torque adjustable tools set the insert by rotation, automatically compensating for material thickness variations.
    Reverses for removal. Tool comes set-up for one size.
    JNT 7529: 750 rpm., 50 in.-lbs. torque. JNT 7530: 2300 rpm. ,
    15 in.-lbs. torque.


    W70 2008
    Hanson Rivet & Supply Co. Inc.
    Phone: 818-485-0500 Fax: 818-485-0540     mail@hansonrivet.com
    Copyright © 2004 Hanson Rivet. Site designed by Web Sights Technology
    CONTACT HANSON RIVET