HANSON RIVET HOME PAGE

Multi-Grip Threaded Inserts
Site Search:
THREADED INSERTS, RIVET-NUTS, CAPTIVE FASTENERS >> Multi-Grip Insert
Click here for
Printer Friendly
Version
Multi-Grip Threaded Inserts

During installation the body collapses on the back side which grips the inside of the mounting surface.
 
  Blind - install from one side
  Adds threads to thin sheets
  Body collapses into 4 pedals
  Easy installation with manual or power tools

Multi-Grip Threaded Inserts Multi-Grip Threaded Inserts
Multi-Grip Threaded Inserts
1. The Threaded Insert is threaded
onto the threaded mandrel of the tool.		   2. The mandrel retracts in the tool or keeps spinning until the clutch disengages. This sets the Insert in the work.   3. The threaded mandrel is un-threaded from the Insert. Now the Insert is ready to accept a screw or bolt.


Multi-Grip Threaded Inserts

THREAD
SIZE

STEEL
YELLOW ZINC
PART NUMBER

GRIP
RANGE

BODY
DIAMETER
(MAX.)

FLANGE
DIAMETER

FLANGE
HEIGHT

LENGTH

REFERENCE

WORK HOLE
DIAMETER

“G”

“A”

“B”

“C”

“L”

“E”

“H”

1/4-20

S25MG280

.020-.280

.384

.625

.057

1.000

.520

.390

S25MG500

.280-.500

.384

.625

.057

1.235

.520

.390

5/16-18

S31MG280

.020-.280

.482

.750

.062

1.118

.570

.488

S31MG500

.280-.500

.482

.750

.062

1.348

.570

.488

M6-1.0

S6MG7.1

0.50-7.10

9.75

15.88

1.45

25.40

13.20

9.91

S6MG12.7

7.10-12.10

9.75

15.88

1.45

31.34

13.20

9.91

M8-1.25

S8MG7.1

0.50-7.10

12.25

19.05

1.57

28.40

14.48

12.40

S8MG12.7

7.10-12.10

12.25

19.05

1.57

34.24

14.48

12.40


W67a 2008
Home  |  Washers  |  Rentals & Repair  |  Charts  |  Articles  |  Sitemap  |  Contact Us
Hanson Rivet & Supply Co. Inc.
Phone: 818-485-0500 Fax: 818-485-0540 mail@hansonrivet.com
Copyright © 2009 Hanson Rivet. Site designed by Web Sights Technology
CONTACT HANSON RIVET