|
|||||||||||||||||||
| ||||||||||||||||||||
 |
 |
 |
||
 |
 |
 |
|
||
|
|
|||||
 |
 |
 |
| During installation the body collapses on the back side which grips the inside of the mounting surface. |
|
|
|
 |
|
|
 |
|
|
 |
| 1. | The Threaded Insert is threaded onto the threaded mandrel of the tool. |
2. | The mandrel retracts in the tool or keeps spinning until the clutch disengages. This sets the Insert in the work. | 3. | The threaded mandrel is un-threaded from the Insert. Now the Insert is ready to accept a screw or bolt. |
 |
 SQUARE SECTION OF BODY (For Anti-rotation)
INSTALLED IN SHEET
|
THREAD |
STEEL |
GRIP |
BODY |
HEAD DIAMETER |
HEAD |
OVERALL |
REFERENCE |
RECOMMENDED |
|---|---|---|---|---|---|---|---|---|
“G” |
“A” |
“B” |
“C” |
“L” |
“E” |
“H” |
||
8-32 |
0GK05-00814 |
.50-1.50MM |
7.10MM |
10.50MM |
0.90MM |
11.40MM |
8.20MM |
7.30MM |
10-24 |
0GK05-01014 |
.50-1.50MM |
7.10MM |
10.50MM |
0.90MM |
11.40MM |
8.20MM |
7.30MM |
10-32 |
0GK07-01014 |
.50-1.50MM |
7.10MM |
10.50MM |
0.90MM |
11.40MM |
8.20MM |
7.30MM |
1/4-20 |
0GK04-00819 |
.50-2.00MM |
9.10MM |
13.20MM |
0.95MM |
15.50MM |
9.90MM |
9.30MM |
 |
||||||||
5MM |
0GJ08-00514 |
.50-1.50MM |
7.10MM |
10.50MM |
0.65MM |
11.40MM |
8.20MM |
7.30MM |
6MM |
0GJ08-00619 |
.50-2.00MM |
9.10MM |
13.20MM |
0.95MM |
15.50MM |
9.90MM |
9.30MM |
8MM |
0GJ08-02823 |
1.00-3.00MM |
11.10MM |
18.00MM |
1.65MM |
18.90MM |
11.80MM |
11.30MM |
W66b 2006 |
| Home | Washers | Rentals & Repair | Charts | Articles | Sitemap | Contact Us Hanson Rivet & Supply Co. Inc. Phone: 818-485-0500 Fax: 818-485-0540 mail@hansonrivet.com Copyright © 2009 Hanson Rivet. Site designed by Web Sights Technology |
Blind - POP® - Avdel® - Cherry RivetsBlind - Speed Fastening®Solid Rivets
