HANSON RIVET HOME PAGE

Half-Hex Threaded Inserts
Site Search:
THREADED INSERTS, RIVET-NUTS, CAPTIVE FASTENERS >> Half-Hex Threaded Inserts
Click here for
Printer Friendly
Version
Half-Hex Threaded Inserts Half-Hex Threaded Inserts Half-Hex Threaded Inserts

During installation the body collapses on the back side which grips the inside of the mounting surface.
 
  Blind - install from one side
  Adds threads to thin sheets
  Thick-wall design for maximum strength
  Easy installation with manual or power tools

Half-Hex Threaded Inserts Half-Hex Threaded Inserts
Half-Hex Threaded Inserts
1. The Threaded Insert is threaded
onto the threaded mandrel of the tool.		   2. The mandrel retracts in the tool or keeps spinning until the clutch disengages. This sets the Insert in the work.   3. The threaded mandrel is un-threaded from the Insert. Now the Insert is ready to accept a screw or bolt.


Half-Hex Threaded Inserts Half-Hex Threaded Inserts
Half-Hex Threaded Inserts
HEXAGON SECTION OF BODY (For Anti-rotation)
INSTALLED IN SHEET

THREAD
SIZE

STEEL
YELLOW ZINC
PART NUMBER

GRIP
RANGE

BODY DIAMETER
ACROSS FLATS
(MAX.)

FLANGE
DIAMETER

FLANGE
HEIGHT

LENGTH
(MAX.)

REFERENCE

RECOMMENDED
HEXAGON HOLE
ACROSS FLATS
+.006 / -.000

“G”

“A”

“B”

“C”

“L”

“E”

“H”

6-32

SH6-32-80

.020-.080

.249

.375

.027

.385

.295

.250

SH6-32-130

.080-.130

.249

.375

.027

.435

.295

.250

8-32

SH8-32-80

.020-.080

.249

.375

.027

.385

.295

.250

SH8-32-130

.080-.130

.249

.375

.027

.435

.295

.250

10-32

SH10-32-130

.020-.130

.280

.390

.027

.435

.275

.281

SH10-32-225

.130-.225

.280

.390

.027

.535

.275

.281

1/4-20

SH250-20-165

.027-.165

.374

.510

.030

.585

.400

.375

SH250-20-260

.165-.260

.374

.510

.030

.685

.400

.375

5/16-18

SH312-18-150

.027-.150

.499

.655

.035

.685

.530

.500

SH312-18-312

.150-.312

.499

.655

.035

.845

.515

.500

3/8-16

SH375-16-150

.027-.150

.499

.655

.035

.685

.530

.500

SH375-16-312

.150-.312

.499

.655

.035

.845

.515

.500

M4-.70

SH4-70-2.0

0.50-2.00

6.35

9.53

0.68

9.78

7.49

6.35

SH4-70-3.3

2.00-3.30

6.35

9.53

0.68

11.05

7.49

6.35

M5-.80

SH5-80-3.3

0.50-3.30

7.10

9.91

0.68

11.05

6.99

7.14

SH5-80-5.7

3.30-5.70

7.10

9.91

0.68

13.59

6.99

7.14

M6-1.0

SH6-10-4.2

0.70-4.20

9.50

12.96

0.76

14.86

10.16

9.53

SH6-10-6.6

4.20-6.60

9.50

12.96

0.76

17.40

10.16

9.53

M8-1.25

SH8-125-3.8

0.70-3.80

12.70

16.64

0.89

17.40

13.46

12.70

SH8-125-7.9

3.80-7.90

12.70

16.64

0.89

21.46

13.08

12.70

M10-1.5

SH10-15-3.8

0.70-3.80

12.70

16.64

0.89

17.40

13.46

12.70

SH10-15-7.9

3.80-7.90

12.70

16.64

0.89

21.46

13.08

12.70

CLOSED END STYLE ALSO AVAILABLE. PLEASE CALL FOR AVAILABILITY.


W66a 2008
Home  |  Washers  |  Rentals & Repair  |  Charts  |  Articles  |  Sitemap  |  Contact Us
Hanson Rivet & Supply Co. Inc.
Phone: 818-485-0500 Fax: 818-485-0540 mail@hansonrivet.com
Copyright © 2010 Hanson Rivet. Site designed by Web Sights Technology
CONTACT HANSON RIVET