| ||||||||||||||||||||
![]() |
![]() |
|
||||||
![]() |
![]() |
![]() |
| AVDEL MAXLOK® Lockbolt system is a two piece fastener consisting of a Lockbolt and Collar. The Lockbolt is placed through the work and the Collar is placed over the end of the Lockbolt. Using the proper tool the two are swagged together and the Lockbolt is broken off flush with the collar. This fastener has a very wide grip range and exceptional clamp-up force, shear and, tensile strengths. |
COLLAR
INSTALLATION SEQUENCE
LOCKBOLT
INSTALLED LOCKBOLT
WITH COLLAR SWAGGED ON AND END OF LOCKBOLT BROKEN OFF |
BRAZIER HEAD
TRUSS HEAD
MUSHROOM HEAD
COUNTERSUNK
|
| LOCKBOLTS |
MATERIAL |
NOMINAL |
HEAD |
PART |
Avdel® |
BODY |
WORK |
GRIP |
BODY |
HEAD |
HEAD |
TYPICAL ULTIMATE |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
“A” |
“H” |
“G” |
“L” |
“B” |
“C” |
SHEAR |
TENSILE |
|||||
STEEL |
3/16 |
BRAZIER |
LB-1901-0610 |
1901-0610 |
.183/.186 |
.203 |
.062-.625 |
1.875-1.900 |
.394 |
.120-.133 |
1855 |
2250 |
MUSHROOM |
LB-1903-0610 |
1903-0610 |
.183/.186 |
.203 |
.062-.625 |
1.875-1.900 |
.490 |
.100-.110 |
1855 |
2250 |
||
TRUSS |
LB-1905-0610 |
1905-0610 |
.183/.186 |
.203 |
.062-.625 |
1.875-1.900 |
.469 |
.100-.110 |
1855 |
2250 |
||
120° |
LB-1902-0610 |
1902-0610 |
.183/.186 |
.203 |
.096-.625 |
.955-1.980 |
.339 |
.085 (NOM.) |
1855 |
2250 |
||
1/4 |
BRAZIER |
LB-1901-0810 |
1901-0810 |
.252/.257 |
.265 |
.062-.625 |
2.065-2.095 |
.525 |
.145-.162 |
2650 |
3600 |
|
MUSHROOM |
LB-1903-0810 |
1903-0810 |
.252/.257 |
.265 |
.062-.625 |
2.065-2.095 |
.656 |
.115-.125 |
2650 |
3600 |
||
TRUSS |
LB-1905-0810 |
1905-0810 |
.252/.257 |
.265 |
.062-.625 |
2.065-2.095 |
.594 |
.100-.120 |
2650 |
3600 |
||
ALUMINUM |
3/16 |
BRAZIER |
LB-1921-0610 |
1921-0610 |
.183/.186 |
.203 |
.062-.625 |
1.875-1.900 |
.394 |
.120-.133 |
950 |
1300 |
1/4 |
LB-1921-0810 |
1921-0810 |
.252/.257 |
.265 |
.062-.625 |
2.065-2.095 |
.525 |
.145-.162 |
1675 |
2200 |
||
| SEE BELOW FOR COLLARS |
|
|||
|
| COLLARS |
MATERIAL |
CORRESPONDING |
FLANGE |
PART |
Avdel® |
BODY |
FLANGE |
FLANGE |
HOLE |
OVERALL |
|---|---|---|---|---|---|---|---|---|---|
“A” |
“B” |
“C” |
“H” |
“L” |
|||||
STEEL |
3/16 |
SMALL |
LB-1981-0600 |
1981-0600 |
.306/.309 |
.380/.395 |
.057-.067 |
.191-.195 |
.284-.294 |
LARGE |
LB-1991-0600 |
1991-0600 |
.306/.309 |
.640/.765 |
.090-.115 |
.191-.195 |
.340-.380 |
||
1/4 |
SMALL |
LB-1981-0800 |
1981-0800 |
.403/.406 |
.500/.515 |
.072-.082 |
.250-.252 |
.365-.375 |
|
ALUMINUM |
3/16 |
SMALL |
LB-1985-0600 |
1985-0600 |
.306/.309 |
.375/.390 |
.057-.067 |
.191-.195 |
.254-.264 |
1/4 |
LB-1985-0800 |
1985-0800 |
.403/.406 |
.490/.510 |
.072-.082 |
.254-.258 |
.368-.378 |
| NOTE: Values for typical ultimate strengths are a guide only and may vary greatly depending upon the application. |
| W54 2008 |
| Home | Washers | Rentals & Repair | Charts | Articles | Sitemap | Contact Us Hanson Rivet & Supply Co. Inc. Phone: 818-485-0500 Fax: 818-485-0540 mail@hansonrivet.com Copyright © 2009 Hanson Rivet. Site designed by Web Sights Technology |