PRH-830 MIDGET CORNER HEAD
Ultra-light head for 90 degree riveting applications. For use on the following tools:
PRG-510A (adaptor PRA-967), PS-2100 (adaptor PRA-985-2100),
PS-2500 (adaptor PRH-830-2500), PRT-5200 (adaptor PRA-985), or PRG-540 (adaptor PRA-965).

PRH-840 MEDIUM DUTY CORNER HEAD
Medium duty head for 90 degree riveting applications. For use on the following tools:
PRG-510A (adaptor PRH-840-510), PS-2100 (adaptor PRH-840-2100),
PS-2500 (adaptor PRH-840-200), PRT-5200 (adaptor PRH-840-5200),
or PRG-540 (adaptor PRH-840-540).

PRH-850 HEAVY DUTY CORNER HEAD
Similar to PRH-830 and 840 except designed for heavy duty use. For use on the
following tools: PRG-540 (adaptor PRH-850-540), or PRT-5400 (adaptor PRH-850-5400).

A-1 OFFSET HEAD
For applications where rivet is installed close to a vertical angle. For use on the following tools:
PRG-510A (adaptor PRA-967), PS-2100 (adaptor PRA-985-2100),
PRT-5200 (adaptor PRA-985), or PRG-540 (adaptor PRA-965).
Specify rivet type, size and material when ordering for proper set-up.

“MCS” MANDREL COLLECTION SYSTEM
Power tools that begin with MCS in their part number are equipped with the
Mandrel Collection System. The MCS system draws the spent mandrels into a
collection chamber on the back of the tool (pictured above) by use of a vacuum.
This also holds a rivet in the tool at any angle while placing the rivet in the work.
This keeps your products safe from contamination and shop floors clean and safe.

PRG510-130 JAW LUBE
Use Jaw Lube regularly to clean and lubricate the moving parts in the nose
of your air powered rivet tools. This will help reduce wear and extend jaw life!