HANSON RIVET HOME PAGE

Tri-Grip Blind Rivets
Site Search:
RIVETS >> Blind - POP® - Avdel® - Rivets >> Tri-Grip - Bulbex® - Klamp Tite Rivets
Click here for
Printer Friendly
Version
 

Bulbex® blind Rivets provide a large bearing surface that resists
pull-out or cracking when set in plastics or other brittle and soft materials.

LOW PROFILE HEAD
LARGE FLANGE
Backside of set rivet

BULBEX® RIVETS

RIVET MATERIAL
MANDREL MATERIAL

HEAD
STYLE

PART
NUMBER

FINISH

BODY
DIAMETER
(MAX.)

WORK HOLE
DIAMETER

GRIP
RANGE

BODY
LENGTH
(MAX.)

HEAD
DIAMETER
(NOM.)

HEAD
HEIGHT
(MAX.)

TYPICAL ULTIMATE
STRENGTHS IN LBS.
(SEE NOTE)

“A”

“H”

“G”

“L”

“B”

“C”

SHEAR

TENSILE

OTHER COLORS AND
FINISHES AVAILABLE

LOW PROFILE
HEAD

OBF01-0516
OBF01-0523

PLAIN

.165

.165/.177

.040-.118
.040-.275

.630
.840

.312

.060

135

225

OBF11-0516
OBF11-0523

BLACK
ANODIZED

.165

.165/.177

.040-.118
.040-.275

.630
.840

.312

.060

135

225

OBF01-0619
OBF01-0625
OBF01-0630

PLAIN

.197

.197/.207

.040-.157
.040-.354
.157-.472

.720
.920
1.07

.387

.080

175

240

OBF11-0619
OBF11-0625
OBF11-0630

BLACK
ANODIZED

.197

.197/.207

.040-.157
.040-.354
.157-.472

.720
.920
1.07

.387

.080

175

240

LARGE
FLANGE

OBF41-0619
OBF41-0625

PLAIN

.197

.197/.207

.040-.157
.040-.354

.720
.920

.610

.080

175

270
NOTE: Values for typical ultimate strengths are a guide only and may vary greatly depending upon the application.



Klamp-Tite® Structural Rivets have an external locking feature for the mandrel which provides exceptional shear and tensile strength, vibration resistance and clamp-up force. These rivets have a wide grip range and provide a large bearing surface that resists pull-out.

PROTRUDING HEAD
COUNTERSUNK
Backside of set rivet

KLAMP-TITE® STRUCTURAL RIVETS
A SPECIAL NOSEPIECE IS REQUIRED FOR INSTALLATION OF THESE RIVETS

RIVET MATERIAL
MANDREL MATERIAL

HEAD
STYLE

PART
NUMBER

BODY
DIAMETER

WORK HOLE
& DRILL SIZE

GRIP
RANGE

BODY
LENGTH
(MAX.)

HEAD
DIAMETER
(NOM.)

HEAD
HEIGHT
(MAX.)

TYPICAL ULTIMATE
STRENGTHS IN LBS.
(SEE NOTE)

“A”

“H”

“G”

“L”

“B”

“C”

SHEAR

TENSILE

OTHER COLORS AND
FINISHES AVAILABLE

PROTRUDING
HEAD

BAPKTR-06-04
BAPKTR-06-06
BAPKTR-06-09
BAPKTR-06-12

.197

.204/.209
#5

.050-.250
.187-.375
.375-.562
.562-.750

.890
.985
1.120
1.300

.445

.088

700

450

BAPKTR-08-04
BAPKTR-08-06

.242

.252/.262
F

.060-.250
.187-.375

.925
1.050

.560

.113

1250

700

90°
COUNTERSUNK

BACKTR-06-06
BACKTR-06-12

.197

.204/.209
#5

.187-.375
.562-.750

.985
1.300

.335

.070

700

450
NOTE: Values for typical ultimate strengths are a guide only and may vary greatly depending upon the application.



W37 2008
Hanson Rivet & Supply Co. Inc.
Phone: 818-485-0500 Fax: 818-485-0540 mail@hansonrivet.com
Copyright © 2004 Hanson Rivet. Site designed by Web Sights Technology
CONTACT HANSON RIVET