Hanson Rivet & Supply Co.
Self-Clinching Fasteners
Site Search:
THREADED INSERTS, RIVET-NUTS, CAPTIVE FASTENERS >> Self-Clinching Captive Fasteners: Installation Principles
Click here for
Printer Friendly
Installation Principles
Self-clinching fasteners install into a round hole which can be punched or drilled into ductile materials. Typically they are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material which is displaced by the knurl into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of mating part.

Boaching fasteners install into a round hole, which can be drilled into non-ductile materials. Once pressed into a printed circuit board or non-ductile material, they are held permanently in place by an interference fit.

Weld nuts are designed for attachment to carbon steel and stainless steel sheet material. They are self piloting into holes and are round, eliminating the need for indexing. Pilot shanks protect threads from weld splatter.

Both self-clinching and broaching types withstand high push-out and torque-out forces. Captive fasteners provide added value by speeding initial assembly as well as servicing in the field, keeping costs to a minimum.

W73 2008


Hanson Rivet & Supply Co. Inc.
Phone: 818-485-0500 Fax: 818-485-0540
Copyright © 2004 Hanson Rivet. Site designed by Web Sights Technology