Hanson Rivet & Supply Co.
PNT110 Threaded Insert Hand Tool
Site Search:
TOOLS, MACHINES & ACCESSORIES >> Blind - POP - Avdel - Cherry Rivet Tools >> POP Blind Rivet Tools >> POP Power Tools & Accessories
Click here for
Printer Friendly

The ProSet® 2500 tool sets new standards for pneumatic rivet tools. Designed specifically to
set a wide range of blind rivets, including 3/16" (4.8mm) High Strength and Stainless Steel,
this tool delivers 2,110 lbs. (9.4 kN) of pulling force with a "highest in class" force-to-weight
ratio of 730 lbf/lb (7.18 kN/kg).

The ProSet® 2500 tool features any innovative high performance features including a
patented "Quick Disconnect" nose housing and jaw case for rapid cleaning and maintenance
of the front end without the need for any tools. With the 2500 "Quick Disconnect" Mandrel
Collection System (MCS), mandrels are safely collected for easy disposal and cleaner work
areas. An air-isolation switch on the MCS prevents air flow when the MCS is disconnected.
The tough aluminum casing is designed to prevent damage and enhance the life of the tool.

A left or right 90° swivel air fitting ensures the tool can be adapted to virtually any
workstation configuration, while the "on/off" switch minimizes air consumption. The spring
return ensures fast, reliable setting cycles reducing operating cost. An extended 5" (140mm)
front end is also available for extra reach in special setting situations. The ProSet® 2500 is
compatible with other Emhart Teknologies automation systems including the remote Mandrel
Collection System (MCS5000), the POP® Rivet Presenter (RP) and the SmartSet®. the 2500
tool model will set 1/8" (3.2mm), 5/32" (4.0mm) and 3/16" (4.8mm) diameter rivets in all
materials including high strength (HS) structural stainless steel rivets. The 2501 tool model
sets 2mm, 3/32" (2.4mm), 1/8 (3.2m) and 5/32 (4.0mm) rivets.
Features & Benefits:
   Lightweight, polymer construction
   Comfortable two finger, low activation force
   Directionable air exhaust (MCS Model)
   High force-to-weight ratio
   Quick disconnect nose housing
   Quck disconnect jaw case
   Quick disconnect Mandrel collector
   On/Off, left or right swivel air fitting
   Spring return for a reliable fast setting cycle

   Extended 5" (140mm) long front end for extra reach
   POP® Rivet Presenter (RP) compatible
   POP® SmartSet® rivet monitoring system compatible

   Air isolation switch during MCS removal
Quick Disconnect
Mandrel Collector

Quick Disconnect

Quick Disconnect
Jaw Guide Technology

Note: Dimensions above inches [mm]
Model Number ProSet® 2500 ProSet® 2500MCS
Weight 2.65 lbs. (1.20 kg) 2.89 lbs. (1.31 kg)
Length 11.42" (290 mm) 11.97" (304 mm)
Height 10.20" (259 mm) 10.20" (259 mm)
Tool Stroke 0.71" (18mm) 0.71" (18mm)
Pulling Force 2110 lbs @ 90 psi (9400 N @ 6.2 bar) 2110 lbs @ 90 psi (9400 N @ 6.2 bar)
Force/Weight Ratio 796.2 lbf/lb (7.83 kN/kg) 730 lbf/lb (7.18 kN/kg)
Air Consumption 0.076 cu. ft/rivet
(2.15 liters/rivet)
2.47 scrfm (max)
[70 liters/min (max)]

Rivet Capacity

Rivet Type Material
Rivet Diameter
1/8" (*)
(3.0-3.2 mm)
(4.0 mm)
(4.8 mm)
Open End &
Aluminum-Steel / St. Steel
St. Steel-St. Steel (†)
Monel-Steel / St. Steel (†)
Closed End Aluminum-Aluminum
Aluminum-Steel / St. Steel
St. Steel-St. Steel;
LSR Rivets Aluminum-Aluminum
HR® Rivets Steel-Steel(**)
T Rivets Aluminum-Steel
Self Plugger Steel-Steel
Ultra-Grip® Aluminum-Aluminum--
St. Steel-St. Steel--
Pull-Thru Steel-Steel    
(*) Use FAN275-028 Jaw pusher set up; (**) Use DPN275-027 Jaw pusher set up.
(†) Excludes Multi-Grip™   St. Steel: Stainless Steel
Note: For 2mm & 3/32" (2.4mm) rivets, use the ProSet 2501. For 2mm, order PRG402-02 jaws and PRN214 nosepiece.
For 3/32" (2.4mm), order PRN314 nosepiece.
Optional Accessories
Part Number


DPN239-11017mm Hex. Socket Screw Key
FAN275-132 Front End 5" (140mm) Extension kit for 1/8", 5/32" & 3/16"
FAN275-133 ProSet® 2500 Seal kit
FA203-408 Adaptor Kit for Remote MCS (MCS5000)
FAN275-134 Mandrel Collection System Retrofit kit
FAN275-198 Reduced diameter .686" (17.4mm) Front
End Kit for 2mm, 3/32", 1/8" & 5/32"
FAN275-222 Conversion Kit for 3/16" Aluminum
FAN275-229 Reduced diameter .686" (17.4mm) Front
End Kit for 3/16" Aluminum
PRH830-2500 PRH830 & A1 Head Adaptor
PRH840-2500 PRH840 Corner Head Adaptor
RP4-350 RP4 / RP5 Receptacle
RP6-350 RP6 Receptacle

MCS Retrofit Kit

Extended Nose Housing Available


Home   Washers  |  Rentals & Repair   Charts   Articles  |  Sitemap  |  Contact Us
Hanson Rivet & Supply Co. Inc.
Phone: 818-485-0500 Fax: 818-485-0540
Copyright © 2014 Hanson Rivet. Site designed by Web Sights Technology